UPDATE

💢 DAILY QUIZZES FOR KWA WILL BE RESTARTING SOON, in the mean while all 60 mock tests will be available to be attended anytime.

💢 Tomorrow onward topic vice previous year repeated questions will be uploaded in quiz format without ranklist 

💢 Subject vice hand written notes, question banks, and other study materials will be added on the notes section 

💢 100+ previous year kerala psc questions, topicwise notes, quizzes, short notes etc has already added you can check them out also. more and more contents will be added soon for freeeeeeee

Comments

  1. Unknown24 September 2020 at 07:35

    Please upload mechanical notes for KWA examination

    ReplyDelete
  2. Anonymous25 September 2020 at 22:20

    Is there any chance to upload ssc materials

    ReplyDelete

Post a Comment

Popular posts from this blog

UNITS OF MEASUREMENTS, PAINTING COEFFICIENT, OUT TURN, QUANTITY CALCULATION

Image
  DEDUCTION  • MASONRY : < 0.1 m2 - no deduction  • PLASTERING :  < 0.5 m2 - no deduction  0.5 - 3 m2 - one side deduction  > 3 - both side deduction  • End of beams, rafters, purlins < 0.05 m2 - no deduction  • Bearing of floors, roof slabs etc. - no deduction DIGREE OF ACCURACY  • Volume - 0.01 m3  • Area - 0.01 m2  • Dimension - 0.01 m  • Weight - 1kg  QUANTITY CALCULATION  PCC  • Maximum size of aggregate 40 mm  • For 1 m3 PCC - 0.95 m3 coarse aggregate is required  RCC  • Maximum size of aggregate 20 mm  • For 1m3 RCC - 0.90 m3 coarse aggregate is require  RCC For 1:1.5:3  Wt of cement = (1/3) x 0.90 x 1440 = 432 kg  Wt of sand = (1.5/3) x 0.90 x 1600 = 747 kg  PCC For 1:4:8  Wt of cement = (1/8) x 0.95 x 1440 = 171 kg  Wt of sand = (4/8) x 0.95 x 1660 = 760 kg PLASTERING  1:3 - 0.14 m3 / 10 m2 (sand) cement = (1/3) x 0.14 x 1440 = 67 kg...
Read more

ROOF - Building Materials short notes and previous year questions

Image
ROOF • Heavy rainfall / snowfall : sloped roof  • Normal rainfall : flat roof  • Architectural : curved roof  TERMS  1. WALL PLATE : transfer load from inclined member to vertical column  2. TEMPLATE : distribute the load over a larger area  3. HIP : if external angle > 180  4. VALLEY : if external angle < 180  5. PRINCIPLE RAFTERS : carries entire load of truss or roof  6. COMMON RAFTERS : carries load of roof covering materials  7. HIP RAFTER : rafter connecting hip points  8. VALLEY RAFTER : rafter connecting Valley points  9. JACK RAFTER : rafter smaller than common rafter  10. VERGE : edge of the gable in a pitched roof  11. BARGE BOARD : wooden plank connecting eaves board and ridge KING POST TRUSS   • Span 5 - 8 m  • Pitch 30 - 40  • King post carries tension loads  • Struts carry compression loads  • Joint connecting principle rafter and king post : mortice and Tenon jo...
Read more