KWA MOCK TEST 7

KWA MECHANICAL PQ MOCK TEST


📌 Attend the quiz below
📌 1 mark per question
📌 No negative marking
📌 Correct answers and your score will be available after the submission of quiz
📌 Correct answers wont be shown for unmarked questions.
📌 Make sure to attend all the questions
📌 After submitting the responses get back to the top of the page to view the score


Comments

  1. Srk9 October 2020 at 08:57

    Is the answer given for 9th qstn is correct?
    And what is the answer of 6th qstn

    ReplyDelete
    Replies
    1. CIVILWAR10 October 2020 at 03:44

      Thanks for letting us knw. It's corrected 9th question answer is pitch. And 6th answer is 4 jaw

      Delete

Post a Comment

Popular posts from this blog

UNITS OF MEASUREMENTS, PAINTING COEFFICIENT, OUT TURN, QUANTITY CALCULATION

Image
  DEDUCTION  • MASONRY : < 0.1 m2 - no deduction  • PLASTERING :  < 0.5 m2 - no deduction  0.5 - 3 m2 - one side deduction  > 3 - both side deduction  • End of beams, rafters, purlins < 0.05 m2 - no deduction  • Bearing of floors, roof slabs etc. - no deduction DIGREE OF ACCURACY  • Volume - 0.01 m3  • Area - 0.01 m2  • Dimension - 0.01 m  • Weight - 1kg  QUANTITY CALCULATION  PCC  • Maximum size of aggregate 40 mm  • For 1 m3 PCC - 0.95 m3 coarse aggregate is required  RCC  • Maximum size of aggregate 20 mm  • For 1m3 RCC - 0.90 m3 coarse aggregate is require  RCC For 1:1.5:3  Wt of cement = (1/3) x 0.90 x 1440 = 432 kg  Wt of sand = (1.5/3) x 0.90 x 1600 = 747 kg  PCC For 1:4:8  Wt of cement = (1/8) x 0.95 x 1440 = 171 kg  Wt of sand = (4/8) x 0.95 x 1660 = 760 kg PLASTERING  1:3 - 0.14 m3 / 10 m2 (sand) cement = (1/3) x 0.14 x 1440 = 67 kg...
Read more

ROOF - Building Materials short notes and previous year questions

Image
ROOF • Heavy rainfall / snowfall : sloped roof  • Normal rainfall : flat roof  • Architectural : curved roof  TERMS  1. WALL PLATE : transfer load from inclined member to vertical column  2. TEMPLATE : distribute the load over a larger area  3. HIP : if external angle > 180  4. VALLEY : if external angle < 180  5. PRINCIPLE RAFTERS : carries entire load of truss or roof  6. COMMON RAFTERS : carries load of roof covering materials  7. HIP RAFTER : rafter connecting hip points  8. VALLEY RAFTER : rafter connecting Valley points  9. JACK RAFTER : rafter smaller than common rafter  10. VERGE : edge of the gable in a pitched roof  11. BARGE BOARD : wooden plank connecting eaves board and ridge KING POST TRUSS   • Span 5 - 8 m  • Pitch 30 - 40  • King post carries tension loads  • Struts carry compression loads  • Joint connecting principle rafter and king post : mortice and Tenon jo...
Read more